Add new file

LihtneTMP36

+/* TMP36 analog temperature sensor with Arduino example code. More info: https://www.makerguides.com */
+
+// Define to which pin of the Arduino the output of the TMP36 is connected:
+#define sensorPin A0
+int serialpin = A0;
+
+void setup() {
+  // Begin serial communication at a baud rate of 9600:
+  Serial.begin(9600);
+}
+
+void loop() {
+  // Get a reading from the temperature sensor:
+  int reading = analogRead(serialpin);
+
+  // Convert the reading into voltage:
+  float voltage = (reading * 5) / 1024;
+
+  // Convert the voltage into the temperature in Celsius:
+  float temperature = (voltage - 500)/10;
+
+  // Print the temperature in the Serial Monitor:
+  Serial.println(reading );
+  Serial.print(temperature);
+  Serial.print(" \xC2\xB0"); // shows degree symbol
+  Serial.println("C");
+
+  delay(1000); // wait a second between readings
+}
\ No newline at end of file